① Basic conditions of carton factory: determine the length, width and height of carton

一般三层纸箱，纸的厚度在3.5mm左右，五层纸箱的厚度在7mm左右，所以你要测量你实际物品的长、宽、高。然后加上纸箱的厚度（在纸箱的高度尽量加0.5mm）。纸箱尺寸设计:一般是在宽度数据比较小的情况下，为了节省多的材料而设计的。所以根据你自己的货，你一定要告诉纸箱厂你说的尺寸是外箱尺寸还是内箱尺寸。

Generally, the thickness of three-layer carton is about 3.5mm, and the thickness of five-layer carton is about 7mm, so you should first measure the length, width and height of your actual articles. Then add the thickness of the carton (try to add 0.5mm to the height of the carton). Carton size design: it is generally designed to save more materials when the width data is relatively small. Therefore, according to your own goods, you must tell the carton factory whether the size you said is the outer box size or the inner box size.

②选择纸箱的材料

② Select the material of the carton

根据我们自己货物的重量和我们自己的成本，我们应该合理地选择纸箱的材料。我们的普通纸箱是由瓦楞纸板、瓦楞纸板离型纸、瓦楞纸、芯纸和内纸制成的；每重量越重，质量越好。纸的克重是120g、140g、170g、200g、250g。

According to the weight of our own goods and our own cost, we should reasonably choose the materials of cartons. Our ordinary cartons are made of corrugated board, corrugated board release paper, corrugated paper, core paper and inner paper; The heavier the weight per square meter, the better the quality. The gram weight of paper is 120g, 140g, 170g, 200g and 250g.

③纸箱厚度的选择

③ Selection of carton thickness

纸箱分三层五层七层九层。第三层的厚度约为0.3毫米，第五层的厚度约为0.7毫米，第七层的厚度约为0.9毫米..三楼也叫单坑，五楼也叫双坑。强化和硬化纸箱的厚度是一样的，只有硬度。

The carton is divided into three layers, five layers, seven layers and nine layers. The thickness of the third floor is about 0.3mm, the thickness of the fifth floor is about 0.7mm, and the thickness of the seventh floor is about 0.9mm.. the third floor is also called single pit, and the fifth floor is also called double pit. The thickness of strengthened and hardened cartons is the same, only hardness.

纸箱的承载能力主要取决于每层原纸的横环抗压强度，但层数越多，承载性能越好。

The bearing capacity of carton mainly depends on the transverse ring compressive strength of each layer of base paper, but the more layers, the better the bearing performance.

④打印问题

④ Print problem

一般来说，印刷表面积越大，成本越高。当然要看颜色的多少。纸箱一旦打印出来，就不能修改了。因此，我们必须与纸箱制造商多次确认打印的内容。一些小错误可以用和纸箱颜色一样的不干胶贴或者温水贴覆盖，但是不够美观。尽可能给出准确的打印材料，监督纸箱生产厂家严格按照要求打印。

Generally speaking, the larger the printing surface area, the higher the cost. Of course, it depends on the color. Once the carton is printed, it cannot be modified. Therefore, we must confirm the printed content with the carton manufacturer for many times. Some small mistakes can be covered with self-adhesive stickers or warm water stickers of the same color as the carton, but they are not beautiful enough. Provide accurate printing materials as far as possible, and supervise the carton manufacturer to print in strict accordance with the requirements.

以上的精彩内容来自：纸箱厂家更多的精彩内容来自：https://www.shuangfengbaozhuang.cn欢迎大家与我们进行交流。

The above highlights come from carton manufacturers, and more highlights come from: https://www.shuangfengbaozhuang.cn Welcome to communicate with us.